Spytec A119 - Installation Tips

Installation Tips
• Keep the lens close to the glass in order to reduce reections.
• Install the camera close to the rear-view mirror for the best view.
• Install in a place where the picture will not be affected by window tint or other
electronic products.
• Do not turn on motion detection unless your vehicle is parked. If motion detection
is enabled while driving, the camera may not continuously record.
• Keep the G-Sensor set to low (default setting).
• Do not install the camera in a location that will interfere with driver visibility or
safety.
• The lens should be positioned within the windshield wiper area to ensure a clear
view on rainy days.
• Do not install device on or near the area where the airbag operates.
• Depending on the location of the cigarette lighter and other accoutrements,
decide whether it makes more sense to channel the cable along the passenger’s
or driver’s side.
• Tuck the power cable into indentations along the periphery of the windshield
where possible. In the absence of recesses, use the adhesive mount hooks to
channel the cable.
• When you’re satised that the cable is snag-free and reaches the cigarette lighter
adapter, use a twisty tie to bunch together any extra length of cable.
SPYTEC A119 DASH CAMERA USER GUIDE 5
Note: The included string is meant for removing a mount by ossing through the
adhesive.