Need help?Do you have a question about the SR Suntour XCT V2 and is the answer not in the manual?
General| Spring Type | Coil |
|---|---|
| Adjustment | Preload |
| Steerer Tube Diameter | 1 1/8 inch |
| Axle | 9mm QR |
| Wheel Size | 26 inch |
| Brake Compatibility | Disc |
| Color | Black |
| Stanchion Diameter | 28mm |
| Type | Suspension Fork |
| Travel | 100mm |
| Weight | 2.5 kg |
Critical warnings about fork usage, potential hazards, and general safety considerations.
Safety considerations related to fork components like cartridges and usage by a single rider.
Advice on proper riding gear, fork selection, bike carriers, and reflectors for safe operation.
Comprehensive checks for fork damage, leaks, proper function, and security before riding.
Emphasizes professional installation due to specialized knowledge and tools required.
Steps for removing old fork, measuring steerer tube, installing crown race, brakes, and wheels.
Procedures and minimum gap requirements for checking tire clearance.
Mount the remote lock lever onto the handlebar.
Remove cover, unscrew bolt, thread cable through the unit.
Cut the cable to the proper length to fit the sliding carriage.
Fine-tune cable tension using the adjustment barrel for precise locking/unlocking.
Reinstall cover, trim cable, and install end cap.
Explains the purpose and limitations of the lock-out system.
How to operate the remote lock lever for RL/RLD/RL series.
How to operate the speed lock out knob for LO/LOD/HLO series.
Adjusting the rebound knob to control fork return speed based on terrain.
Hub requirements for proper Qloc system operation, illustrated with diagrams.
Step-by-step guide for operating the QLOC 15mm system for installation and removal.
Advice on cleaning, avoiding pressure washers, and servicing frequency.
Recommended maintenance tasks at different intervals (after ride, 25h, 50h, 100h).
Detailed descriptions of dealer-performed service tasks.
Details the warranty period, transferability, and claim process.
Lists conditions that void the warranty or are not covered.
Identifies parts subject to normal wear and tear, not covered by warranty.
To Next Page