Need help?Do you have a question about the SR Suntour RAIDON and is the answer not in the manual?
General| Intended Use | Cross Country, Trail |
|---|---|
| Stanchion Diameter | 32mm |
| Damping | Hydraulic |
| Type | Front Suspension Fork |
| Wheel Size Compatibility | 26", 27.5", 29" |
| Steerer Tube | 1-1/8" Straight, Tapered |
| Axle | 9mm QR, 15mm Thru-Axle |
| Lockout | Yes |
| Spring Type | Coil, Air |
| Adjustments | Rebound, Preload |
Step-by-step guide for properly installing the suspension fork onto the bicycle frame.
Procedure to verify sufficient clearance between the tire and fork components.
Specific instructions for installing the remote lock lever on RL/RL series forks.
How to engage and disengage lock-out for Raid on RLD/RL and XCR RL series forks.
How to engage and disengage lock-out for Raid on LO/LOD, XCR LO, and XCM V2 HLO series forks.
Guide to adjusting the rebound damping speed on Raid on RLD and LOD series forks.
Step-by-step guide for operating the Q-Lock 15mm system on specific models.
Explanation of how local laws may affect warranty rights.
Conditions and exclusions that limit the scope of the product warranty.
Important safety advice for parents regarding children's bicycle use and safety gear.
Guidance on ensuring the bicycle is correctly sized and adjusted for the rider's comfort and safety.
Essential safety precautions and equipment checks before riding the bicycle.
Detailed pre-ride inspection checklist for bicycle safety and component function.
Advice for the initial ride, focusing on familiarization with controls and safe operation.
Fundamental safety rules, legal compliance, and basic riding precautions.
Guidelines for safe riding practices on roads and shared paths, including obeying traffic laws.
Specific safety considerations and best practices for riding bicycles off-road.
Precautions and adjustments needed for safe riding in wet conditions, affecting traction and braking.
Safety measures and equipment recommendations for riding in low visibility conditions.
Warnings and advice for high-risk riding activities, emphasizing increased danger and skill requirements.
Safety considerations and compatibility checks when modifying the bicycle with new parts or accessories.
How to determine the correct standover height for bicycle frame size for safety and comfort.
Adjusting saddle height, angle, and fore/aft position for optimal rider comfort and performance.
Adjusting handlebar and stem height/angle for proper rider fit and control.
Adjusting brake and shift levers for comfortable reach and efficient operation.
How to adjust brake levers for riders with smaller hands to ensure proper braking control.
Information on bicycle wheel types, securing mechanisms, and proper removal/installation procedures.
Proper adjustment and clamping procedure for seat post cam action binders for secure mounting.
Detailed explanation of bicycle brake types, their operation, and essential safety checks.
How to operate derailleur and internal gear hub drivetrains for optimal performance and smooth gear changes.
Information on pedal types, toe overlap, and the correct use of toe clips or clipless pedals.
General guidance on understanding, maintaining, and adjusting bicycle suspension systems.
Information on tire pressure, types, valves, and essential tube maintenance.
Recommended maintenance tasks and frequency for bicycle components and overall service to ensure longevity.
Bikes for paved roads, gravel, and improved trails, with weight limits.
Bikes for cross-country riding on intermediate terrain, with weight limits.
Bikes for rough technical areas and moderate jumps, with weight limits.
Bikes for difficult terrain and aggressive riding, with weight limits.
Bikes for jumps and ramps, designed for skill and bike control, with weight limits.
Bikes for cyclo-cross riding, training, and racing on varied terrain, with weight limits.
Explains metal properties, corrosion resistance, and ductility in bicycle frames.
Discusses carbon fiber composites, their strength, limitations, and inspection for damage.
Advice on original vs. aftermarket components and their fatigue life considerations.
Explanation of the mechanism and activation of a coaster brake.
Recommendation to seek dealer service for coaster brake adjustment due to complexity.
Steps for completing and submitting the warranty registration card for purchasers outside North America.
To Next Page