SR SUNTOUR - OWNERS MANUAL RAIDON / XCR /XCM / XCT / M3000AL / M2025 SR SUNTOUR - OWNERS MANUAL RAIDON / XCR /XCM / XCT / M3000AL / M2025
English
13
SR SUNTOUR forks are designed to be nearly maintenance free. However, as long as moving parts
are exposed to moisture and contamination, the performance of your fork might be reduced after
several rides. To maintain a high performance, safety and a long life of your fork, a periodic main-
tenance is required.
Please keep in mind that a fork which has not been serviced in accordance with
the maintenance instructions will loose its warranty!
Never use a pressure washer or any water under pressure to clean your fork as
water may enter the fork at the dust seal level.
We recommend that your fork is being serviced more fequently as indicated
below if you ride in extreme weather (winter time) and terrain conditions.
Any case you may feel that your forks performance has changed or handles die-
rently immediately call on your local dealer to inspect your fork.
FORK MAINTENANCE
SERVICE 1: Checking fork‘s functions / cleaning and greasing bushings / lubricate remote lock
cable and housing / checking torque values / checking air pressure / checking fork for
any scratches, dents, cracks, bent or tarnished parts and stress marks.
SERVICE 2: Service 1 + disassembling / cleaning whole fork / lubricating dust seals and oil wipers /
greasing remote lock and travel adjust top caps / sealing air valve top caps by greasing
it / checking for any air leakings / checking torque values / tuning according to rider‘s
personal preferences.
FORK MAINTENANCE
Maintenance Schedule after each ride every 25h every 50h every 100h
clean stanchion tubes and dust
seals
inspect upper tubes for
scratches
check main xing bolts for
proper torque (Nm)
check air pressure
oil dust seals with teon oil (e.g.
Brunox Fork Deo)
service 1 (at the dealer)
service 2 (at the dealer)
To Next Page
Loading...
