SR SUNTOUR - OWNERS MANUAL RAIDON / XCR /XCM / XCT / M3000AL / M2025 SR SUNTOUR - OWNERS MANUAL RAIDON / XCR /XCM / XCT / M3000AL / M2025
English
11
In order to lock your fork you have to
turn the lock out lever clockwise. Lo-
cking or unlocking your fork while ri-
ding is not posssible.
XCT V2 MLO SERIES
M2025 MLO SERIES
REBOUND DAMPING ADJUST
The rebound function of SR SUNTOUR hydraulic suspension forks allows you to tune your fork ac-
cording to your personal preferences and the terrain you are riding on. This function enables you
to control the speed of your fork‘s rebound after it‘s being compressed.
If you are going to ride on a terrain with a lot of small and fast bumps, we recommend to increase
your forks rebound speed. Otherwise it implies the risk that your front wheel loses its contact to
the ground. If you are going to ride on a terrain with a lot of big and slow bumps, we recommend
to decrease your forks rebound speed.
In order to increase the rebound speed
of your fork you have to turn the adjus-
ter knob counter clock-wise. To decrease
the speed you have to turn it clockwise.
RAIDON RLD SERIES
RAIDON LOD SERIES
TURN
Adjuster
Knob
Qloc hub requirements
According to function of our Qloc system there are some requirements hub‘s have to fulll to
make this system work smoothly. Please nd the explanation down below:
Non-Recommend Shape
Limited Function
Edges within the hub can
cause the axle to get stuck
Recommend Shape
Full Function
No Edges
To Next Page
Loading...
