To Next PageTo Next Page
Need help?Do you have a question about the SRAM eTap HRD Series and is the answer not in the manual?
General| Brakes | Hydraulic Disc |
|---|---|
| Shifter Compatibility | SRAM eTap AXS |
| Brake Lever Use | Road |
| Brake Lever Actuation | Hydraulic |
| Water Resistance | IPX7 |
| Speeds | 2x12 |
| Brake Lever Material | Aluminum |
| Shift Lever Material | Aluminum |
| Compatibility | SRAM AXS components |
| Weight | Varies by configuration |
| Connectivity | Wireless |
Read and understand safety and warranty documents before installation.
Do not use mineral oil; use only DOT 4 or DOT 5.1 brake fluids.
Step-by-step guide to start the pairing process by holding the function button on the rear derailleur.
Instructions for completing pairing steps involving front derailleur and shifters.
Notices and warnings for using eTap systems on e-Bike/Pedelec, including multi-shift functionality.
How to install the shift-brake lever onto the handlebar and set its desired position.
Procedure for tightening rotor bolts in an alternating sequence to achieve specified torque.
CRASH HAZARD warning regarding proper bolt engagement for post mount calipers.
Steps to loosely install caliper, squeeze lever, and tighten bolts to center caliper.
Procedure for centering caliper by squeezing the brake lever and tightening bolts.
CRASH HAZARD warning regarding improper bolt engagement for rear calipers.
How to loosen, adjust, and tighten the banjo bolt and hose angle using a T25 TORX wrench.
How to adjust the lever reach using a 2.5 mm hex wrench.
CRASH HAZARD warning regarding heavy braking during bed-in and safety precautions.
Setup for the high limit screw, including derailleur position and screw threading.
How to fine-tune rear derailleur shifting to eliminate unwanted sounds using micro-adjustments.
Warnings for safe battery handling, keeping away from children, and seeking medical attention if ingested.
Warnings regarding battery replacement and disposal, including never disposing of batteries in fire.
