Need help?Do you have a question about the SRAM GX 2x10 and is the answer not in the manual?
General| Chainring Material | Aluminum |
|---|---|
| Type | Mountain |
| Speeds | 10 |
| Shifting System | Mechanical |
| Compatibility | SRAM 10-speed components |
| Weight | Varies by configuration |
| Crank Arm Length Options | 170mm, 175mm |
| Bottom Bracket Compatibility | GXP |
| Chainring Bolt Circle Diameter (BCD) | 104mm |
| Number of Gears | 20 |
Aligning lower pulley with smallest cog for high limit setting.
Step-by-step guide for routing shifter cables on SRAM derailleurs.
Aligning upper pulley with largest cog for low limit setting.
Using B-Adjust screw to set chain gap, especially for full suspension bikes.
Specific gap settings for B-Adjust screw based on derailleur model.
Correcting slow shifting from larger to smaller cogs (outboard).
To Next Page
