Need help?Do you have a question about the SRAM Guide RS and is the answer not in the manual?
General| Brake Type | Hydraulic Disc |
|---|---|
| Lever Material | Aluminum |
| Caliper Design | 2-Piston |
| Adjustment | Reach Adjust |
| Fluid Type | DOT 5.1 |
| Pad Material | Organic |
| Caliper Material | Aluminum |
| Rotor Compatibility | CenterLine |
| Rotor Size | 160mm, 180mm, 200mm |
| Weight | 375g (Direct Mount, 800mm hose) |
Details the extent of the limited warranty, its limitations, liability disclaimers, and customer legal rights.
Emphasizes wearing safety glasses and nitrile gloves, proper fluid handling, and disposal procedures.
Advises on the correct service order for Guide calipers and levers, and fluid requirements.
Step-by-step guide to address sticky brake pistons and improve lever function.
Lists necessary parts, safety equipment, tools, lubricants, and fluids for servicing the brake caliper.
Visual breakdown of caliper components for identification and service reference.
Detailed instructions on how to safely remove brake pads from the caliper assembly.
Procedure for removing caliper pistons, including necessary tools and warnings.
Instructions on how to properly install new or cleaned caliper pistons and seals.
Lists necessary parts, safety equipment, tools, lubricants, and fluids for servicing brake levers.
Visual breakdowns of RS and R lever components for identification and service reference.
Instructions on how to detach the lever blade from the lever body.
Detailed steps for removing the piston assembly from the lever body.
Instructions for correctly installing the piston assembly back into the lever body.
Detailed procedure for reassembling the lever blade for the RS model.
Detailed procedure for reassembling the lever blade for the R model.
To Next Page
