EasyManua.ls Logo

SRAM X01 Eagle AXS - Cassette Range and Freehub Requirements; Cassette Installation Tools and Compatibility

SRAM X01 Eagle AXS
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
SRAM EAGLE AXS
™
/ EMBARGO: FEB 06, 2019 / RETAIL: APR 2019
What cassette size ranges do you offer for Eagle AXS
™
?
SRAM Eagle AXS
™
uses the X-DOME Eagle
™
cassette
with a 10-50T gear range. A cassette with a proven track
record of performance, features and design.
What type of freehub body is required for
Eagle AXS
™
cassettes?
An XD
™
driver body is required for Eagle AXS
™
cassette
compatibility.
Is a special cassette tool required to install or
remove SRAM Eagle AXS
™
cassettes?
No. These cassettes require a standard HG-style
cassette tool with a 7-8mm spline depth.
Is there a cassette available with an 11-tooth start so I don’t
have to change the driver on my rear wheel to XD
™
?
SRAM offers a PG-1230 Eagle
™
cassette which utilises the HG
splined driver body interface. This is compatible with all of
our Eagle
™
drivetrain parts as part of the Eagle
™
ecosystem.
However, for optimum performance the XG-1295 and XG-1299
cassettes are used in the Eagle AXS
™
offering.
Are special chain tools, chain pliers, or chain whips required
to work on Eagle AXS
™
drivetrains?
The Eagle AXS
™
B-gap tool is used to set the correct position
for the AXS
™
derailleur. It should be noted that the AXS
™
B-Gap
tool is different than the current Eagle
™
B-Gap tool and they
are not compatible. The majority of standard and professional
tools will work on Eagle AXS
™
drivetrains. Care should
always be taken to ensure the tool is fully compatible with
each component - this can be found on tool manufacturers
specifications and websites.
SRAM EAGLE AXS
™
CASSETTES / FAQ