Need help?Do you have a question about the Sricam SP017 and is the answer not in the manual?
General| Night Vision | Yes |
|---|---|
| Motion Detection | Yes |
| Two-way Audio | Yes |
| Lens | 3.6mm |
| IR Distance | 10m |
| Video Compression | H.264 |
| Power Supply | DC 5V/2A |
| Operating Temperature | -10°C to 50°C |
| Connectivity | Wi-Fi / Ethernet |
| Storage | MicroSD card, up to 128GB |
| Ethernet | 10/100Mbps |
| Compatibility | Android, iOS |
| Resolution | 1280 x 720 (720P) |
| Pan/Tilt | 355° Pan, 90° Tilt |
| Image Sensor | 1/4" CMOS |
Connect the IP camera to power and the network router. Reset to default settings if necessary.
Download and install the "Sricam" mobile application via QR code or app store.
Create a user account for the Sricam app by providing email and password.
Add the camera to the app using its Device ID and password to view the live stream.
Physically insert the microSD card into the camera's slot.
Format the SD card and configure recording settings within the Sricam App.
Access and play recorded video files from the microSD card via the Sricam App.
Activate motion detection and the alarm switch in the camera's settings.
Select notification methods: phone push, buzzer, or email alerts.
To Next Page
