To Next PageTo Next Page
Need help?Do you have a question about the Sricam SP007 and is the answer not in the manual?
General| Camera Type | IP Camera |
|---|---|
| Lens | 3.6mm |
| Field of View / Viewing Angle | 75° |
| Storage | MicroSD card (up to 128GB) |
| Motion Detection | Yes |
| Operating Temperature | -10°C to 50°C |
| Pan/Tilt | No |
| Connectivity | WiFi 802.11 b/g/n, Ethernet |
| Operating Humidity | 10% - 90% |
| Image Sensor | CMOS |
| IR Distance | 15 meters |
| Audio | Two-way audio |
Connect the IP camera to power and network using an Ethernet cable.
Download and install the Sricam application on your smartphone.
Add the camera to the app by entering its unique device ID and password.
Secure your camera by changing the default administrator password.
Set up the camera to connect to a Wi-Fi network.
Overview of the live video stream interface and its controls.
Solutions for signal inconsistency and Wi-Fi connection problems.
Physical insertion guide for the microSD card into the camera.
Steps for formatting the SD card and setting up recording.
Access and view recorded footage from the microSD card via the app.
Configuration steps to activate motion detection alerts.
Enable the motion detection and alarm switch functions.
Choose preferred notification methods for motion detection alerts.
