EN
01
Installing and charging the camera batteries
1 2 3 4
Power
DC 5V
ON/OFF
RESET
1. Insert two 18650 rechargeable batteries into the battery compartment .
Follow the steps shown below (you need to use a pair of batteries of the same brand and capacity,
old and new batteries cannot be mixed)
2. When the battery power is exhausted, there is no need to take out the battery, you can
directly use the power adapter to connect the camera to charge the battery, and the charging
time is about 5-8 hours.
Micro SD
SH033B Battery Installation Procedure:
SH037B Battery Installation Procedure:
To Next Page
Loading...
