Need help?Do you have a question about the SRM EXAKT and is the answer not in the manual?
Ensure crank thread is clean and apply grease to the pedal thread before installation.
Manually screw the lock nut to the external seal until it stops.
Ensure Bluetooth is on your device and open the EXAKT Power app.
Click 'Search EXAKT Power Pedals' and select the pedal displayed on your screen matching its serial number.
Enter your crank length and select 'Calibrate' to begin the calibration process.
Remove the chain and position the crank vertically downwards.
Apply at least 10kg of downward pressure on the center of the pedal.
Hold axle position with Allen key and tighten the lock nut to 35 Nm (±25kg).
General| Brand | SRM |
|---|---|
| Model | EXAKT |
| Category | Bicycle Accessories |
| Language | English |
To Next Page
