SRM PowerMeter 7 - User Manual

Training System
www.SRM.de
PowerMeter 7
PowerControl 7
Short Manual

Summary

SRM PowerControl Buttons and Views

SRM Training System Installation

Cadence Magnet Installation

Instructions for installing the cadence magnet on the crank arm.

PowerMeter and Sensor Alignment

Guide for aligning the PowerMeter and cadence magnet for optimal performance.

Speed Transmitter Installation

Steps for installing the speed transmitter and magnet on the wheel.

Handlebar Clip Mounting

How to attach the SRM PowerControl to different handlebars using clips.

Waking the PowerControl from Sleep Mode

SRM PowerControl Data Display Modes

Real-Time Training Data

Explanation of real-time data displayed during training sessions.

Average Training Data

Details on viewing average training data for the current file.

Maximum Training Data

Information on the maximum values recorded during a training session.

Time and Date Menu Configuration

SRM Sensor Pairing Procedure

SRM PowerControl Device Settings

Setting the Zero Offset

Procedure to manually or automatically set the zero offset for accurate power readings.

Setting the Altitude

How to set the absolute altitude using the PowerControl device.

System Operations and Information

Clearing the PowerControl Display

How to clear the PowerControl display to start a new training session.

Battery Status Check

Checking the battery status of the PowerControl unit.

Total Training Data Summary

Viewing accumulated training distance, hours, and energy expenditure.

SRM PowerControl Setup Menu

SRM Software Installation and Usage

FCC Compliance Declaration

SRM PowerMeter 7 Specifications

General

Type	Crank-based power meter
Compatibility	ANT+, Bluetooth
Water Resistance	IPX7
Data Transmission	ANT+, Bluetooth
Power Range	0-2500W