To Next PageTo Next Page
Need help?Do you have a question about the Srne MC Series and is the answer not in the manual?
General| Output Frequency | 50Hz / 60Hz |
|---|---|
| Output Waveform | Pure Sine Wave |
| MPPT Voltage Range | Depends on model |
| Protection Features | Overload, Short Circuit, Over Temperature |
| Cooling | Fan cooling |
| Operating Temperature | -10°C to +50°C |
Provides a general overview of the MC series MPPT solar charge controller and its technology.
Lists the key features and advanced technologies of the MC series MPPT solar charge controller.
Details the physical appearance and interface ports of the MPPT solar charge controller.
Explains the Maximum Power Point Tracking (MPPT) technology used in the solar charge controller.
Introduces the different charging stages (quick, holding, floating) for battery charging.
Provides essential safety precautions and guidelines to follow during the installation of the controller.
Specifies the recommended wire sizes and types for connecting the PV array and battery.
Details the step-by-step process for installing and wiring the MPPT solar charge controller.
Explains the meaning of different LED indicators for PV array, battery status, and battery type.
Describes how to operate the controller using the key for battery type selection and parameter reset.
Outlines the various protection functions built into the controller, such as waterproofing and over-temperature.
Provides recommendations for regular maintenance to ensure optimal long-term performance of the controller.
Lists detailed electrical specifications including model, voltage, current, power, efficiency, and dimensions.
Shows the default charging parameters for different types of batteries supported by the controller.
Presents the conversion efficiency curves for the 12V system under various output power conditions.
Presents the conversion efficiency curves for the 24V system under various output power conditions.
