01-35
ENGINE D20DT
KYRON 2007.04
0000-00
12. MAINTENANCE AND REPAIR
1) Maintenance and lubrication
▶ Normal Vehicle Use
The maintenance instructions contained in the maintenance schedule are based on the
assumption that the vehicle will be used for the following reasons:
To carry passengers and cargo within the limitation of the tire inflation prassure. Refer to
"Wheels and Tire" in section 4H.
To be driven on reasonable road surfaces and within legal operating limits.
1.
2.
▶ Explanation of Scheduled Maintenance Services
The services listed in the maintenance schedule are further explained below.
When the following maintenance services are performed, make sure all the parts are replaced
and all the necessary repairs are done before driving the vehicle. Always use the proper fluid
and lubricants.
Engine Oil and Oil Filter Change
▷
Always use above the API SH grade or recommended engine oil.
Engine Oil Viscosity
▷
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operation.
Lower viscosity engine oils can provide better fuel economy and cold weather performance;
however, higher temperature weather conditions require higher viscosity engine oils fo
satisfactory lubrication. Using oils of any viscosity other than those viscosities recommended
could result in engine damage.
Cooling System Service
▷
Drain, flush and refill the system with new coolant. Refer to "Recommended Fluids
nd
Lubricants" in this section.
To Next Page
Loading...
Need help?
General
