CRUISE CONTROL SYSTEM
undefined
8510-23
2) Accelerating with the Cruise Control System
(1) While the cruise control system is running
To increase the set speed, push up the cruise control switch lever to ACCEL side and hold it
until the desired speed is reached without depressing the accelerator pedal.
When the desired speed is set, release the switch lever.
1.
2.
(2) When the cruise control system is not running
Accelerate the vehicle to more than 36 km/h (22.37 mph) using the accelerator pedal.
Push up the cruise control switch lever to ACCEL side and hold it.
When the desired speed is reached, release the accelerator pedal and the switch lever.
1.
2.
To increase the speed with the cruise control system while the system is not running, follow the
procedures below.
(3) Tap-up while the cruise control system is running
Push up the cruise control switch lever to ACCEL side for less than 0.5 second per one
switching while the cruise control system is running; the speed increases each time by 1.3
km/h (0.81 mph).
For example, if you want to increase the speed 13 km/h (81 mph) more than the previous set
speed, tap up the switch lever to ACCEL side ten times without using the accelerator pedal.
1.
2.
To increase the vehicle speed in stages while the cruise control system is running, follow the
procedures below.
To Next Page
Loading...
Need help?
General
