EasyManua.ls Logo

Ssl DD662B - User Manual

Ssl DD662B
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Questions and Answers

  • B
    baileystacyJul 31, 2025
    Why Ssl Car Receiver cannot power on?
    • C
      Catherine ObrienJul 31, 2025
      If your Ssl Car Receiver won't power on, there are a couple of things to check. First, examine the fuse and replace it with a new one of the same type if it's blown. Secondly, some factors might cause the MPU to malfunction. In this case, press the RES button on the panel using a penpoint, and then try powering it on again.
  • C
    Christopher EdwardsAug 5, 2025
    What to do if Ssl DD662B cannot play disc?
    • C
      Charles KellyAug 6, 2025
      If your Ssl Car Receiver is unable to play a disc, here are a few potential reasons and solutions: * The disc might be scratched, in which case you should use a new disc. * You may have inserted the disc incorrectly; ensure the labeled side is facing up. * The lens could be dirty; try cleaning it with a lens cleaning disc.
  • N
    Nicole DavisAug 10, 2025
    What to do if Ssl DD662B has no image?
    • D
      Deanna DixonAug 11, 2025
      If your Ssl Car Receiver shows no image, it might be due to the MPU malfunctioning. Try pressing the RES button on the panel with a penpoint and then power it on again.
  • T
    Tracy PenaAug 15, 2025
    Why does Ssl DD662B Car Receiver have poor performance of radio station?
    • A
      amberalvarezAug 15, 2025
      If your Ssl Car Receiver's radio station performance is poor, it could be due to a weak signal. Try moving your car to a different location and then research for available stations.
  • A
    Aaron GarciaAug 20, 2025
    What to do if Ssl DD662B Car Receiver cannot load disk?
    • P
      Peggy RodriguezAug 20, 2025
      If your Ssl Car Receiver cannot load a disc, make sure that there isn't already one inside. Remove any existing disc before trying to insert a new one.
  • J
    Jessica BradleyAug 25, 2025
    Why setting information all lose after ignition switch off in Ssl DD662B?
    • D
      Dwayne HinesAug 26, 2025
      If your Ssl Car Receiver loses all setting information after the ignition switch is turned off, this could be due to changing the battery or fuse. In this case, you will need to reset the information and save it.

Summary

Accessory

DVD Parental Control Function

Manages DVD content access based on age ratings.

Specifications

Panel Introduction

Basic Function

Wiring Diagram

Visual guide for connecting system components.

Trouble Shooting

Touch Screen Calibration

Remote Control Function

Version

Touch Calibration

Recalibrates touchscreen for accurate response.

Access Setup Interface

Turn On;Off

Procedure for powering the device on and off.

Access Main Interface

Navigating to the primary user interface.

USB;SD Card Operation

Managing and playing media from USB/SD cards.

Radio Operation

Other Operation

Rear View Function

Displays rear camera feed when vehicle is in reverse.

ST. Wheel Setting

Disc Operation

BT Operation

Ssl DD662B Specifications

General IconGeneral
BrandSsl
ModelDD662B
CategoryCar Receiver
TypeDigital Media Receiver
DIN SizeDouble DIN
RadioAM/FM
BluetoothYes
USB PortYes
USB Ports1
AUX InputYes
GPS NavigationNo
DVD PlayerNo
CompatibilityAndroid

Related product manuals