1
Introduction
This camera is designed for use as a front view or rear-facing backup
camera, and mounted on the vehicle’s front or rear bumper. When
installed with any of our camera-capable head units, the camera view can
be automatically triggered when shifting into reverse or manually triggered
by selecting the camera button from the head unit home screen.
Package Contents
• 1x Camera with power and video sockets
• 1x Power cable with power plug
• 1x Video cable with two yellow RCA plugs
• Camera mounting kit (including one installation bit)
• User manual
Important
Please read and understand all instructions before you use your product.
Failure to follow the instructions could result in injury and/or damage that
could potentially void the warranty.
Important safety precautions
• Use of the camera must not replace other safe driving habits. Precise
control and looking around before backing up is necessary.
• Always remember that the area displayed by the camera is limited, and
certain obstacles may not be detected or not reliably detected.
Installation precautions
• WARNING: Always consult a professional installer.
• Improper wiring and mounting of the camera can cause damage, injury
or accident. Have installation performed by a professional only. Contact
our technical support for any installation questions.
• Disconnect the negative terminal of the vehicle battery prior to wiring.
• Hide wires under car oor mat or through car headliner. Make sure
wires are not squeezed or damaged by sharp edges. Use rubber
grommets if passing through sheet metal.
To Next Page
Loading...