4
Troubleshooting
Problem Solution
No image Ensure the camera’s power cable is securely plugged.
Ensure there is correct and secure wiring between the
camera and your head unit.
Ensure the reverse input wire on your head unit is
connected to the vehicle’s reverse light.
Ensure correct camera settings on your head unit.
Image blurry Check for water drops or dust on the camera lens.
Clean it with a damp, ber-free cloth.
Image shaking Ensure the camera is tightly mounted.
Image slanted Adjust the camera mounting bracket.
Image Setting
• To remove the on-screen parking guidelines, cut the white wire loop
which splits from the camera’s cable.
• Make sure to unplug the power cable from the camera and plug it again
to enable the new setting (after cutting the white wire loop).
To Next Page
Loading...