What to do if my Ssl Dash Camera has no image?
If your Ssl Dash Camera is not displaying an image, make sure the camera's power cable is securely plugged in. Also, verify that the wiring between the camera and your head unit is correct and secure. Check that the reverse input wire on your head unit is connected to the vehicle's reverse light and confirm the camera settings on your head unit are correct.
Why is the image blurry on my Ssl Dash Camera?
If the image on your Ssl Dash Camera is blurry, check the camera lens for water drops or dust. If present, clean the lens with a damp, fiber-free cloth.
Power| power supply | 12 VDC |
|---|
Operating Environment| operating temperature range | -22 to +140°F (-30 to +60°C) |
|---|---|
| maximum relative humidity | 95% |
| ingress protection rating | IP67 |
Camera| viewing angle | 170° |
|---|---|
| resolution (TV lines) | 480 |
| effective pixels | 648 x 488 |
Video Output| video output | 1.0 vp-p, 75 Ω |
|---|---|
| S/N ratio | ≤45 dB |
| electronic shutter speed | 1/60 (NTSC) |
Dimensions and Installation| flush mount hole diameter | 0.73” (18.5 mm) |
|---|---|
| video cable length | 197”/5m |
| power cable length | 39”/1m |
To Next Page