Do you have a question about the ST NUCLEO-H743ZI2 and is the answer not in the manual?
Microcontroller | STM32H743ZI |
---|---|
Architecture | ARM Cortex-M7 |
Operating Frequency | 480 MHz |
Flash Memory | 2 MB |
SRAM | 1 MB |
Analog Inputs | 16 |
DAC Channels | 2 |
Timers | 14 |
On-board Debug | ST-LINK/V2-1 |
Operating Voltage | 3.3 V |
Form Factor | NUCLEO-144 |
USB | 2.0 full-speed and high-speed |
Ethernet | 10/100 Mbps |
Connectivity | UART, SPI, I2C, CAN |
Extension Headers | Arduino Uno V3, ST morpho |
Step-by-step guide for initial board setup and demonstration.
Identifies major components and connectors on the board's top view.
Details the integrated debugging and programming tool.
Explains various methods to power the Nucleo-144 board.