ST NUCLEO-H755ZI-Q - User Manual

December 2019 UM2408 Rev 2 1/51
1
UM2408
User manual
STM32H7 Nucleo-144 boards (MB1363)
Introduction
The STM32H7 Nucleo-144 boards based on the MB1363 reference board (NUCLEO-
H745ZI-Q, NUCLEO-H755ZI-Q, NUCLEO-H7A3ZI-Q) provide an affordable and flexible
way for users to try out new concepts and build prototypes, by choosing from the various
combinations of performance and power consumption features provided by the STM32H7
microcontroller. The ST Zio connector, which extends the ARDUINO
®
Uno V3 connectivity,
and the ST morpho headers provide an easy means of expanding the functionality of the
Nucleo open development platform with a wide choice of specialized shields. The STM32H7
Nucleo-144 boards do not require any separate probe as they integrate the STLINK-V3E
debugger/programmer. The STM32H7 Nucleo-144 boards come with the comprehensive
free software libraries and examples available with the STM32Cube MCU Package.
Pictures are not contractual.
Figure 1. Nucleo-144 board (Top view) Figure 2. Nucleo-144 board (Bottom view)
www.st.com
Downloaded from Arrow.com.

ST NUCLEO-H755ZI-Q Specifications

General

Manufacturer	STMicroelectronics
Microcontroller	STM32H755ZI
Core Size	32-bit
Speed	480 MHz
Flash Memory	2 MB
SRAM	1 MB
Connectivity	USB, CAN, I2C, SPI, UART
Ethernet	Yes
Number of I/Os	140
Program Memory Type	Flash
Operating Temperature	-40°C ~ 85°C
Mounting Type	Through Hole
Package / Case	LQFP-144
Expansion Interface	Arduino, ST morpho
On-board Debugger	ST-LINK/V2-1
Core Processor	ARM Cortex-M7
USB	USB 2.0
Peripherals	DMA, PWM
Voltage - Supply (Vcc/Vdd)	1.7V ~ 3.6V
Power Supply	USB or External Source

Summary

Quick start

Getting started

Step-by-step guide to configure and launch the demo application.

Hardware layout and configuration

Nucleo-144 board layout

Illustrates connections and key features of the Nucleo-144 board.

Program and debug the onboard STM32 H7 target

Using the STLINK-V3 E to program and debug the onboard STM32 H7

Details features and usage of the integrated STLINK-V3E debugger.

Using an external debug tool to program and debug the onboard STM32 H7

Power supply and power selection

Power supply input from STLINK-V3 E USB connector (Default setting)

Guide on powering the board via the ST-LINK USB connector.

External power supply input from VIN (7-11 V, 800 mA max)

Instructions for connecting an external VIN power supply (7-11V).

External power supply input 5 V_EXT (5 V, 500 mA max)

Instructions for connecting an external 5V_EXT power supply.

External power supply input from USB CHARGER (5 V)

How to power the board using a 5V USB charger.

External power supply input from 3 V3_EXT (3.3 V)

Using a 3.3V external supply, which disables ST-LINK power.

Debugging while using VIN or EXT as an external power supply

Procedure for debugging when using VIN or EXT for power.

Internal SMPS; LDO Configuration

Internal SMPS; LDO Configuration

USART communication

USB OTG FS or device

Ethernet (Only with NUCLEO-H745 ZI-Q and NUCLEO-H755 ZI-Q)

Solder bridges