ST NUCLEO-F767ZI - User Manual

December 2017 DocID028599 Rev 7 1/82
1
UM1974
User manual
STM32 Nucleo-144 boards
Introduction
The STM32 Nucleo-144 boards (NUCLEO-F207ZG, NUCLEO-F303ZE, NUCLEO-F412ZG,
NUCLEO-F413ZH, NUCLEO-F429ZI, NUCLEO-F439ZI, NUCLEO-F446ZE,
NUCLEO-F722ZE, NUCLEO-F746ZG, NUCLEO-F756ZG, NUCLEO-F767ZI and
NUCLEO-H743ZI) provide an affordable and flexible way for users to try out new concepts
and build prototypes, by choosing from the various combinations of performance and power
consumption features provided by the STM32 microcontroller. The ST Zio connector, which
extends the Arduino
™
Uno V3 connectivity, and the ST morpho headers provide an easy
means of expanding the functionality of the Nucleo open development platform with a wide
choice of specialized shields. The STM32 Nucleo-144 boards do not require any separate
probe as they integrate the ST-LINK/V2-1 debugger/programmer. The STM32 Nucleo-144
boards come with the comprehensive free software libraries and examples available with
the STM32Cube MCU Package, as well as a direct access to the Arm
®
Mbed Enabled
™
on-
line resources at http://mbed.org.
Figure 1. Nucleo-144 board (top view) Figure 2. Nucleo-144 board (bottom view)
www.st.com
All manuals and user guides at all-guides.com
all-guides.com

ST NUCLEO-F767ZI Specifications

General

Microcontroller	STM32F767ZIT6
Core	ARM Cortex-M7
Clock Speed	216 MHz
Flash Memory	2 MB
SRAM	512 KB
Analog Input Pins	16
Ethernet	Yes
On-board Debugger	ST-LINK/V2-1
DAC Channels	2
Debug Interface	SWD
Connectivity	I2C, UART
ADC Channels	24
Communication Interfaces	I2C, SPI, UART, CAN
USB	USB 2.0 OTG FS, USB 2.0 OTG HS
Timers	17 (including 2 watchdog timers)

Summary

Introduction

Features

Ordering Information

Quick Start

Getting Started

Step-by-step guide to configure the Nucleo-144 board and run the demo application.

System Requirements

Development Toolchains

Overview of supported software development environments and compilers.

Hardware Layout and Configuration

Embedded ST-LINK;V2-1

Details on the integrated ST-LINK debugger/programmer, its features, and usage.

Power Supply and Power Selection

Describes methods for powering the Nucleo-144 board via USB or external sources.

USB OTG FS or Device

Configuration and usage of the USB OTG or device functionality.

Ethernet

Solder Bridges

Extension Connectors

ST Zio Connectors

ST Morpho Connector