Do you have a question about the ST STM32 NUCLEO-F072RB and is the answer not in the manual?
Microcontroller | STM32F072RBT6 |
---|---|
Core | ARM Cortex-M0 |
Operating Voltage | 3.3V |
Input Voltage | 7-12V |
Operating Frequency | 48 MHz |
Flash Memory | 128 KB |
SRAM | 16 KB |
Analog Input Pins | 16 |
ADC Channels | 16 |
Debug Interface | ST-LINK/V2-1 |
Dimensions | 69 mm x 53 mm |
Communication Interfaces | I2C, SPI, USART |
USB | USB 2.0 FS |
Board Connectors | Arduino Uno R3, ST Morpho |
Step-by-step guide to configure the board and launch demo software.
Details the integrated ST-LINK/V2-1 debugger and programmer features.
Covers various methods and considerations for powering the Nucleo board.
Specifies external power input options and their voltage/current ranges.
Lists all solder bridges and their functions for board configuration.
Details pin assignments for ARDUINO Uno V3 connectors on various boards.
Details pin assignments for the ST morpho connectors on various boards.