ST STM32 NUCLEO-F411RE User Manual

August 2020 UM1724 Rev 14 1/68
1
UM1724
User manual
STM32 Nucleo-64 boards (MB1136)
Introduction
The STM32 Nucleo-64 boards based on the MB1136 reference board (NUCLEO-F030R8,
NUCLEO-F070RB, NUCLEO-F072RB, NUCLEO-F091RC, NUCLEO-F103RB,
NUCLEO-F302R8, NUCLEO-F303RE, NUC
LEO-F334R8, NUCLEO-F401RE,
NUCLEO-F410RB, NUCLEO-F411RE, NU
CLEO-F446RE, NUCLEO-L010RB,
NUCLEO-L053R8, NUCLEO-L073RZ, NUCLEO-L152RE
, NUCLEO-L452RE,
NUCLEO-L476RG
) provide an affordable and flexible way for users to try out new concepts
and build prototypes with the STM32 microcontrollers in the LQFP64 package, choosing
from the various combinations of performance, power consumption, and features. The
ARDUINO
®
Uno V3 connectivity support and the ST morpho headers provide an easy
means of expanding the functionality of the Nucleo open development platform with a wide
choice of specialized shields. The STM32 Nucleo boards do not require any separate probe
as they integrate the ST-LINK/V2-1 debugger and programmer. The STM32 Nucleo boards
come with the comprehensive free software libraries and examples available with the
STM32Cube MCU Packages, as well as direct access to the Arm
®
Mbed
™
online resources
at
http://mbed.org/ .
Figure 1. STM32 Nucleo-64 board
Picture is not contractual.
www.st.com
All manuals and user guides at all-guides.com

ST STM32 NUCLEO-F411RE Specifications

General

Microcontroller	STM32F411RET6
Core	ARM Cortex-M4
Operating Voltage	3.3V
Input Voltage	7V to 12V
Operating Frequency	100 MHz
Flash Memory	512 KB
SRAM	128 KB
Digital I/O Pins	50
Analog Input Channels	16
DAC Channels	1
On-board Debugging	ST-LINK/V2-1
Communication Interfaces	I2C, SPI, USART
USB	USB 2.0
Connectors	Arduino Uno
Form Factor	Nucleo

Summary

Quick Start Guide for STM32 Nucleo Boards

Getting Started with the Nucleo Board

Step-by-step guide to configure and launch the demo software on the board.

Hardware Layout and Configuration

Embedded ST-LINK/V2-1

Integrated ST-LINK/V2-1 debugger/programmer, supporting SWD and new features.

Power Supply and Power Selection

Explains powering the board via USB or external sources, including VIN and E5V.

ARDUINO® Connectors

Pin assignments and compatibility for ARDUINO® Uno V3 connectors.

ST Morpho Connector

Pin assignments for the ST morpho connector for board expansion and probing.

Nucleo-64 Boards Information

Board Revision History

Details the evolution and changes across different board revisions.