
Do you have a question about the ST NUCLEO-F411RE and is the answer not in the manual?
| Microcontroller | STM32F411RET6 |
|---|---|
| Core | ARM Cortex-M4 |
| Operating Frequency | 100 MHz |
| Flash Memory | 512 KB |
| SRAM | 128 KB |
| Digital I/O Pins | Up to 50 |
| DAC Channels | 1 |
| On-board Debugger | ST-LINK/V2-1 |
| Operating Voltage | 3.3 V |
| Input Voltage | 7-12V |
| Communication Interfaces | I2C, SPI, USART |
| USB | USB 2.0 full-speed |
| Extension Headers | Arduino Uno V3 |
Explains the meaning of the board order code nomenclature.
Step-by-step guide to configure the board and launch the demo.
Details the integrated ST-LINK/V2-1 debugger and programmer.
Covers different methods for powering the Nucleo board.
Details the pin assignments and functions of the ARDUINO® Uno V3 connectors.
Explains the ST morpho connector and lists pin assignments for STM32.












Loading...