Do you have a question about the ST STM32 NUCLEO-F303K8 and is the answer not in the manual?
Microcontroller | STM32F303K8T6 |
---|---|
Core | ARM Cortex-M4 |
Operating Voltage | 3.3V |
Input Voltage | 7-12V |
Flash Memory | 64 KB |
Clock Speed | 72 MHz |
Debug Interface | ST-LINK/V2-1 |
Communication Interfaces | I2C, SPI, USART |
Connectors | Arduino Nano |
USB | USB 2.0 FS device |
Steps to configure the board and launch the demonstration software.
Lists the necessary software and hardware for using the board.
Details on the integrated ST-LINK/V2-1 debugger and its drivers.
Covers USB and external power inputs, selection, and limitations.
Description of LEDs, push button, JP1, OSC, USART, and solder bridges.
Pin assignment tables for Arduino Nano connectors on various boards.