DocID028406 Rev 1 9/31
UM1956 Conventions
30
4 Conventions
Table 2 provides the conventions used for the ON and OFF settings in the present
document.
In this document the reference is “STM32 Nucleo-32 board” for all information that is
common to all sale types.
Table 2. ON/OFF conventions
Convention Definition
Jumper JPx ON Jumper fitted
Jumper JPx OFF Jumper not fitted
Solder bridge SBx ON SBx connections closed by solder or 0 ohm resistor
Solder bridge SBx OFF SBx connections left open
To Next Page
Loading...
