ST NUCLEO-L010RB User Manual

August 2020 UM1724 Rev 14 1/68
1
UM1724
User manual
STM32 Nucleo-64 boards (MB1136)
Introduction
The STM32 Nucleo-64 boards based on the MB1136 reference board (NUCLEO-F030R8,
NUCLEO-F070RB, NUCLEO-F072RB, NUCLEO-F091RC, NUCLEO-F103RB,
NUCLEO-F302R8, NUCLEO-F303RE, NUC
LEO-F334R8, NUCLEO-F401RE,
NUCLEO-F410RB, NUCLEO-F411RE, NU
CLEO-F446RE, NUCLEO-L010RB,
NUCLEO-L053R8, NUCLEO-L073RZ, NUCLEO-L152RE
, NUCLEO-L452RE,
NUCLEO-L476RG
) provide an affordable and flexible way for users to try out new concepts
and build prototypes with the STM32 microcontrollers in the LQFP64 package, choosing
from the various combinations of performance, power consumption, and features. The
ARDUINO
®
Uno V3 connectivity support and the ST morpho headers provide an easy
means of expanding the functionality of the Nucleo open development platform with a wide
choice of specialized shields. The STM32 Nucleo boards do not require any separate probe
as they integrate the ST-LINK/V2-1 debugger and programmer. The STM32 Nucleo boards
come with the comprehensive free software libraries and examples available with the
STM32Cube MCU Packages, as well as direct access to the Arm
®
Mbed
™
online resources
at
http://mbed.org/ .
Figure 1. STM32 Nucleo-64 board
Picture is not contractual.
www.st.com

ST NUCLEO-L010RB Specifications

General

Microcontroller	STM32L010RB
Core	ARM Cortex-M0+
Clock Frequency	32 MHz
Flash Memory	128 KB
Analog Inputs	Up to 16
ADC Channels	Up to 16
DAC Channels	0
Communication Interfaces	I2C, SPI, USART
USB	No
On-board Debugger	ST-LINK/V2-1
Operating Voltage	1.8 to 3.6 V
Expansion Headers	Arduino Uno V3
Power Supply	Via USB or external power supply
Development Environment	STM32CubeIDE, Keil, IAR

Summary

Introduction to STM32 Nucleo-64 Boards

STM32 Nucleo-64 Board Features

Core Features Overview

Overview of key features including MCU, LEDs, buttons, and interfaces.

On-board Debugger and Software Support

Details on the integrated ST-LINK/V2-1 debugger and available software.

Ordering and Product Information

Product Ordering Codes

Table listing product order codes and their corresponding STM32 MCUs.

Product Identification

Information on board identification labels, revisions, and serial numbers.

Board Revision History

Details on changes across different hardware revisions of the Nucleo boards.

Development Setup and Quick Start

Development Environment Setup

System requirements and toolchains for developing applications.

Getting Started Guide

Step-by-step guide to get the board running and test demo software.

Bootloader Limitations

Known limitations of the bootloader on NUCLEO-L476RG.

Hardware Layout and Configuration

Embedded ST-LINK/V2-1 Features

Details the integrated debugger, its driver, firmware, and programming capabilities.

Power Supply and Selection

Explains board power options via USB, VIN, E5V, and +3.3V inputs.

Clock Configuration Options

Details on configuring high-speed (HSE) and low-speed (LSE) clock sources.

USART Communication Setup

Setup for USART communication via various board connectors.

Solder Bridge Configuration

Explains the function of solder bridges for I/O and power configuration.

ARDUINO Connector Pinouts

Pin assignments for ARDUINO Uno V3 connectors on various Nucleo boards.

ST Morpho Connector Pinouts

Pin assignments for ST morpho connectors on various Nucleo boards.

Document Revision History