Flash the IoT node
Using Installed Script
• Once built the project, it is necessary to launch the “.bat” script located in folder
C:\STM32L4AzureSeminar\Hands-
on\STM32CubeFunctionPack_AZURE1_V3.1.0\Projects\Multi\Applications\Azure_Sns_DM\MDK-ARM\B-
L475E-IOT01
In order to flash the MCU, the usage of the script is required to install in the MCU a bootloader together with
the project binary. Bootloader is used in Lab 6 for Firmware update.
143
To Next Page
