STA-RITE ABG Series User Manual

SERIES “ABG”
SWIMMING POOL PUMP
O W N E R’ S M A N U A L
INSTALLATION, OPERATION & PARTS
Sta-Rite Pool/Spa Group
293 Wright Street, Delavan, WI 53115
International: 262-728-5551, FAX: 262-728-7550
www.starite.com
Union City, TN • Delavan, WI • Mississauga, Ont. • Murrieta, CA
© 2003, Sta-Rite Industries, Inc. Printed in U.S.A. S486 (Rev. 8/5/03)
DO NOT
OVER TIGHTEN
This manual should be furnished to
the end user of this pump; its use
will reduce service calls and chance
of injury and will lengthen pump life.

STA-RITE ABG Series Specifications

General

Type	Above Ground
Voltage	115/230V
Port Size	1.5 inches
Wet End Material	Thermoplastic
Connection Size	1.5 inches

Summary

Important Safety Instructions

Understanding Safety Alert Symbols

Installation

Pump Mounting Requirements

Details essential criteria for secure and proper pump placement, including location and stability.

Electrical

Voltage Considerations

Wiring and Connections

Instructions for proper wiring, GFCI installation, and outlet connections.

Operation

Priming the Pump

Steps to fill the pump and piping with water before starting.

Storage and Winterizing

Draining the Pump

Startup After Winterizing

Pump Service

Removing and Installing Shaft Seal

Detailed instructions for replacing the pump's shaft seal assembly.

Troubleshooting Guide

Troubleshooting Pump Failures

Diagnosing issues like loss of prime, reduced capacity, or discharge pressure problems.

Troubleshooting Electrical Issues

Troubleshooting Mechanical Issues