1. Level the OLS 26.
2. Rotate the level through 180°.
3. Use the adjusting screws (9) to reduce
the extent to which the bubble has
moved outside the central ring by 50%.
Then level the instrument and check again.
1/2
1/2
Technical data
Telescope magnication: 26 x
Minimum focussing distance: ca. 1 m
Diameter of eld of vision at 100m: 2,1 m
Objective lens aperture: 38 mm
Accuracy* Compensator accuracy: 0,5“
Vertical accuracy in an individual measurement: 1mm / 10m
Standard deviation: < 2mm/km
Circular vial: 8‘/2mm
Distance measurement Multiplication constant: 100
Addition constant: 0
Horizontal circle increments: 1°
Operating temperature range: -20°C ... + 40°C
Storage temperature range: -30°C ... + 55°C
Protection class: IP 54
* When operated within specied temperature range
Subject to technical modications.
Guarantee terms and conditions
In addition to the statutory rights to which the purchaser is entitled and which are
not limited by this guarantee, STABILA guarantees the instrument against defects and
the absence of the warranted characteristics resulting from material or manufacturing
defects for a period 24 months from the date of purchase. This guarantee is valid
worldwide. STABILA has the right to decide at its own discretion whether the defects
will be rectied by being repaired or whether the instrument will be replaced. STABILA
accepts no further liability. Defects caused by improper handling (e.g. damage caused
by the eects of powerful electric currents, operating the instrument with the incorrect
voltage / type of current, use of unsuitable power sources) as well as modications to
the instrument undertaken by the purchaser or third parties invalidate the guarantee.
No liability is accepted for normal wear and tear and minor defects which do not detract
from the function of the instrument. Please send your claims under the guarantee
along with the completed guarantee certicate to the guarantor (See last page).
To Previous Page
Loading...
Need help?
General
