Stabila Laser LAX 300 - User Manual

Laser LAX 300
Operating instructions
en

Summary

Operating Instructions

Main Components

Identifies and describes the various parts and controls of the laser unit.

Operating Modes

Operating mode with self-levelling

Explains how to use the self-levelling feature of the laser.

Operating mode without levelling function

Details how to operate the laser manually without self-levelling.

Plumb line function mode

Describes the procedure for using the plumb line functionality.

Accuracy Checks and Calibration

Checking the calibration

Outlines the process for checking the laser's calibration.

Horizontal checking - Line level

Specific test for verifying horizontal line and level accuracy.

Horizontal checking - inclination of the laser line

Procedure to check the inclination of the laser line.

Vertical check

Method for testing the vertical alignment accuracy of the laser.

Checking plumblining

Procedure to verify the accuracy of the plumb line.

Battery and Technical Information

Replacing the batteries

Instructions for inserting and replacing the device's batteries.

Technical data

Lists the key technical specifications and performance data.

Stabila Laser LAX 300 Specifications

General

Accuracy	± 0.3 mm/m
Laser Class	Class 2
Laser Wavelength	635 nm
Output Power	< 1 mW
Protection Class	IP54
Operating Temperature	-10 °C to +50 °C
Battery Type	AA Batteries
Operating Time	Up to 15 hours