Need help?Do you have a question about the Stabila Laser LA-P+L and is the answer not in the manual?
General| Brand | Stabila |
|---|---|
| Model | Laser LA-P+L |
| Category | Laser Level |
| Language | English |
Lists and describes all components of the STABILA levelling and line laser unit.
Explains safety measures for Class 2 lasers, emphasizing not looking into the beam.
Clarifies the purpose of laser spectacles, which enhance visibility, not provide protection.
Details the process of setting up the unit on a firm base for accurate levelling using the transverse vial.
Instructions on projecting a vertical line onto a wall using the unit on the floor.
Method for transferring points between floor and ceiling using the laser line.
Describes creating reference planes at right angles using a prism for partitioning applications.
Guidance on hanging the unit for rapid marking of points at the same height using suspension eyelets.
Step-by-step guide to verify the accuracy of the laser spot projection.
Procedures for adjusting the laser beam alignment based on calibration checks.
Method to check the accuracy of the laser line projection against a reference.
Instructions for safely replacing the batteries in the unit.
Guidelines for cleaning the laser aperture and the unit body using appropriate materials.
Details laser type, output, self-levelling range, and accuracy.
Covers batteries, operating life, temperature ranges, and auto-off function.
Outlines the warranty period, coverage, and exclusions for defects and misuse.
To Next Page
