Need help?Do you have a question about the Stabila 196 electronic IP65 and is the answer not in the manual?
Visual and acoustic cues guide the user to precise horizontal or vertical positions.
How to change display units (degrees, percent, mm/m, in/ft) using the MODE button.
Use the REF button to designate any angle as the new zero reference point.
Store the current measurement value using the HOLD button.
Prevents erroneous readings if the spirit level is tilted beyond acceptable limits.
Steps to verify and ensure the precise accuracy of the electronic spirit level.
Align unit to a wall and press CAL to calibrate for basic accuracy.
Triggers for recalibration: deviation, reference change, temperature change.
Align unit horizontally and confirm with CAL button.
Visual and acoustic cues guide the user to precise horizontal or vertical positions.
How to change display units (degrees, percent, mm/m, in/ft) using the MODE button.
Use the REF button to designate any angle as the new zero reference point.
Store the current measurement value using the HOLD button.
Prevents erroneous readings if the spirit level is tilted beyond acceptable limits.
Steps to verify and ensure the precise accuracy of the electronic spirit level.
Align unit to a wall and press CAL to calibrate for basic accuracy.
Triggers for recalibration: deviation, reference change, temperature change.
Align unit horizontally and confirm with CAL button.
General| IP Rating | IP65 |
|---|---|
| Laser Class | 2 |
| Measuring accuracy with electronic inclination measurement | ± 0.1° |
| Laser Wavelength | 635 nm |
| Type | Electronic |
| Measuring accuracy in normal position | ±0.2 mm/m |
| Measuring accuracy in reverse position | ±0.2 mm/m |
To Next Page
