Stagg Truss34 - Page 8

Sound Mode
With the menu button, select the Sound mode (Soud) and press the enter key to
confirm. Then use the up and down buttons to select the desired sensibility of the
microphone from Sen0 to Sen9.
Show Mode
With the menu button, select the Show mode (Shou) and press the enter key to
confirm. Then use the up and down buttons to select the desired show from Sh01 to
Sh06 and press the enter key to confirm. You can now change the speed of the
show from SP01 to SP99. Press enter to confirm.
The next menu allows you to add a strobe effect to the show. Use the up and down
buttons to change the strobe speed from St00 to St99.
Sh01
RGBW Single colour gradual change
Sh02
Multicolour gradual change
Sh03
Effect 1
Sh04
Effect 2
Sh05
RGBW Single colour jump change
Sh06
Multicolour jump change