To Next PageTo Next PageWhat to do if the clock function is not maintained on Stahl ET-316-A Control Systems after switching on?
If the clock function on your Stahl Control Systems device isn't maintained after being switched on for a longer period, it's likely due to battery failure. The capacitor can only maintain the clock function for approximately four days. As a result, you'll need to manually reset the time and date or reset it via a connected system.
General| Brand | Stahl |
|---|---|
| Model | ET-316-A Series |
| Category | Control Systems |
| Language | English |
Introduces Series 300, 400, and 500 Operator Interfaces, Panel PCs, and Thin Clients.
Highlights warnings for high temperatures and laser radiation.
Outlines power supply requirements and connection interfaces.
Specifies operating temperature, storage, heat dissipation, and environmental conditions.
Lists standards and directives the devices comply with, including ATEX.
Specifies Ex classification for ATEX and IECEx according to various standards.
Details rated voltage, power consumption, and terminal specifications.
Lists rated voltage and operating voltage for external non-intrinsically safe circuits.
Provides maximum values for USB interfaces for Groups IIC and IIB.
Details parameters for Reader RSi1 and WCR1 interfaces.
Provides crucial safety notes for installing and operating the HMI devices.
Highlights specific safety measures for hazardous environments and intrinsically safe circuits.
Covers safe shutdown, potential hazards, and intended use.
Emphasizes adherence to electrical installation and operation regulations.
Details grounding requirements, mounting positions, and air circulation.
Details the pin assignments for various terminals like X1, X2, X3, X4, X5, X6, X7.
Details pin assignments for reader, PS2, and Ethernet interfaces.
Details features and licensing of Windows 10 IoT Enterprise 2019 LTSC.
Emphasizes safe shutdown procedures and data loss prevention.
Details hazardous location classification and enclosure requirements per NEC.
Provides wiring diagrams for hazardous locations according to NEC.
Provides wiring diagrams for hazardous locations according to CEC.
Shows wiring for Zone 1, Group IIC and Zone 21, Group IIIC per CEC.
Declares conformity to ATEX, EMC, and RoHS directives with listed standards.
Specifies ATEX classification for Type TX and Type FX interfaces.
Lists product details and manufacturer information for RCM compliance.
Covers EAC declaration details, applicant, manufacturer, and validity period.
