To Next PageTo Next PageWhat to do if the clock function is not maintained on Stahl Control Systems after switching on?
If the clock function on your Stahl Control Systems device isn't maintained after being switched on for a longer period, it's likely due to battery failure. The capacitor can only maintain the clock function for approximately four days. As a result, you'll need to manually reset the time and date or reset it via a connected system.
General| Brand | Stahl |
|---|---|
| Model | ET-336-A Series |
| Category | Control Systems |
| Language | English |
Provides technical data for ET-3x6-A devices based on hardware revision.
Provides technical data for ET-4x6-A devices based on hardware revision.
Details the power supply specifications and consumption for HMI devices.
Lists maximum voltage and current values for external non-intrinsically safe circuits.
Provides wavelength and radiant power for external inherently safe optical interfaces.
Lists maximum values for intrinsically safe circuits for USB and reader interfaces.
Provides essential safety guidelines for installing and operating the HMI device.
Warns about potential radio interference and explosion hazards.
Provides general information and regulations for electrical plant installation.
Details installation requirements and precautions for ET-xx6-A devices.
Covers general information and specific cut-out dimensions for assembly.
Outlines general care and conditions for operating HMI devices.
Details terminal pin assignments for power supply, serial, USB, and audio interfaces.
