Need help?Do you have a question about the Stahl ST 0502-8/2 and is the answer not in the manual?
General| Brand | Stahl |
|---|---|
| Model | ST 0502-8/2 |
| Category | Chain Hoists |
| Language | English |
Outlines operator responsibilities and precautions for safe working practices with the hoist.
Mandates annual inspections by a qualified person to ensure ongoing safety and service life.
Provides instructions on how to mount the hoist in a stationary configuration.
Details the process of adjusting and fitting the trolley to the runway flange.
Guides on attaching the trolley to the chain hoist for various models.
Details the procedure for safely connecting the hoist to the main power supply.
Lists essential tests and checks required before the hoist is put into service.
Defines responsibilities and daily checks for the crane operator for safe use.
Details the operation and reset procedure for the emergency stop button.
States that only qualified persons may perform maintenance tasks.
Outlines recommended maintenance schedules based on operating hours and FEM groups.
Describes how to test the slipping clutch's ability to prevent overload without a load.
Explains how to adjust the slipping clutch using test loads for overload protection.
Details procedures for checking and adjusting the hoist motor brake.
Details the hoist's classification according to FEM standards for load capacity and duty cycles.
To Next Page