Safety
Proper use, operating area
The SmartCheck type 10, 100, 400 and 800 torque testers are
suitable for testing tracking and click type torque wrenches as well as
for generally measuring torques.
The SmartCheck type 10S torque tester is exclusively suitable for
testing tracking and click type torque screwdrivers.
Use in explosive areas is prohibited.
Proper use also includes observing and compliance with all of the
data in these instructions. This particularly applies to observing and
compliance with all safety instructions and warning notices as well as
the technical limit values. The DPG must only be used by personnel
trained in using the DPG.
Any other, or more extensive, use is regarded as improper, and can
lead to material damage or personal injury
Basic safety instructions
Avoiding a risk of explosion
Risk of explosion due to use of the DPG in explosive areas.
Do not use the DPG in explosive areas.
Avoiding electric shock
There is a risk of fatal accident due to electric shock if you ignore the
following safety instructions:
Never open the DPG housing.
Use only the CE-conformant plug-in power supply unit included in
the scope of delivery, see Page 15.
Prior to cleaning work on the DPG, disconnect the plug-in power
supply unit from the DPG.
To Next Page
Loading...
