20
CONSOLE SET UP
access
maintenance mode
within 15 seconds of console wake - up
Press UP + DOWN + TIME SIMULTANEOUSLY TO ENTER MAINTENANCE MODE
PRESS UP + DOWN BUTTONS TO ACCESS MAINTENANCE SCREENS
PRESS TIME TO TOGGLE THROUGH
P1 TREAD (HIITMILL)
P2 BIC 1 (HIITBIKE / AIRFIT)
P3 ERGO (HIIT UBE)
P4 STEP
P5 BIC 2 (AIRFIT GEN 1)
P6-P9 NONE
CUMULATIVE HOURS AND DISTANCE
SOFTWARE VERSION
screen 1
product information
screen 2
active time out
PRESS TIME BUTTON TO ADJUST
DEFAULT 15 SECONDS
PRESS TIME BUTTON TO ADJUST
DEFAULT 30 SECONDS
screen 3
summary mode time
screen 4
select machine type
PRESS DISTANCE BUTTON TO CHANGE UNITS
screen 5
select units
FOR THE HIITMILL ONLY
PRESS RESISTANCE LEVER TO THE
FORWARD MOST POSITION
PRESS TIME BUTTON TO SET ANGLE TO ZERO
screen 7
HIITMILL CALIBRATION
ONLY IF RECOMMENDED BY STAIRMASTER
INSERT USB
DRIVE LOADED WITH SOFTWARE INTO SLOT ON RIGHT SIDE OF CONSOLE
PRESS CALORIE BUTTON
WAIT FOR COUNT UP
REMOVE USB
screen 8
SOFTWARE UPDATE
exit
maintenance mode
PRESS enter to exit maintenance mode
read owner’s manual for complete instructions + safety warnings
PRESS BLUETOOTH BUTTON TO TURN ANT+ ON OR OFF
screen 6
ANT +
To Next Page
Loading...
