To Next PageTo Next Page
Need help?Do you have a question about the Stalker Dual DSR and is the answer not in the manual?
Details mounting the combined display and counting units using brackets and securing methods.
Explains how to mount the display unit separately from the counting unit.
Provides instructions for mounting the counting unit in a separate location.
Instructions for attaching the antenna unit and connecting its cable.
Details installing the battery and optional mounting for the cordless remote.
Explains the cable requirement for connecting the wired remote control.
Explains Doppler frequency shift measurement in stationary mode.
Details speed measurement in opposite lane moving mode using two signals.
Describes speed measurement in same lane moving mode with two signals.
Explains the Fast Mode feature for tracking high-speed targets.
Overview of the STALKER DUAL DSR display panel and its indicators.
Describes the PWR switch, Target, Middle, Patrol windows, and XMIT, FRONT, REAR indicators.
Details the FORK, SAME, LOCK, RFI, Lo V, and FAST icon indicators.
Explains the voice annunciations for locked targets and audio settings.
Details target Doppler audio, beep tones, and their volumes.
Explains the automatic self-test function and its indicators.
Describes the dual function of the STRONG LOCK/REL/STOPWATCH MODE key.
Details target locking and faster target tracking ON/OFF functions.
Explains how to toggle between Radar and Stopwatch modes.
Explains how to alternate between moving and stationary radar modes.
Describes how to switch between same lane and opposite lane modes.
Details how to switch between front and rear antennas.
Explains toggling between transmit (XMIT) and hold (HLD) states.
Used to start and stop timing in Stopwatch mode.
Alternates between faster target lock and release functions.
Adjusts the radar's range (sensitivity) up or down.
Sets the 100s digit for the speed measurement zone length.
Toggles squelch override on/off and adjusts voice volume.
Sets the 10s digit for the speed measurement zone length.
Selects low-end patrol speed options (5 or 20 mph).
Sets the 1s digit for the speed measurement zone length.
Performs a diagnostic check on the unit and antenna.
Adjusts the volume of the target Doppler audio up or down.
Adjusts the volume of voice annunciations using SQL key.
Adjusts the volume of beep tones using PS BLANK key.
Blanks patrol speed window and acquires new patrol speed.
Activates keyboard backlight and controls display brightness.
Alternates between same lane and opposite lane moving modes.
Dual function key for target lock and stopwatch initiation.
Details target locking and faster target tracking ON/OFF.
Toggles radar between Radar and Stopwatch modes.
Controls transmit/hold in Radar mode and start/stop in Stopwatch mode.
Starts and stops timing for target vehicles in Stopwatch mode.
Toggles between transmit and hold states in Radar mode.
Switches between front and rear antennas, indicates status.
Toggles between four operating radar modes (moving, SC, SA, S_).
Locks faster targets or releases them.
Adjusts radar range (sensitivity) from 1 to 4.
Sets the 100s digit for the speed measurement zone length.
Toggles squelch override and adjusts voice enunciator volume.
Sets the 10s digit for the speed measurement zone length.
Selects low-end patrol speed (5, 20 mph, or SP with VSS).
Sets the 1s digit for the speed measurement zone length.
Performs diagnostic checks on the unit and antenna.
Adjusts the volume of the target Doppler audio.
Adjusts voice enunciator volume with Squelch key.
Adjusts beep tone volume with Patrol Spd Blank key.
Blanks patrol speed window and acquires new patrol speed.
Controls display brightness and keyboard backlight.
Step-by-step guide for measuring speed in stationary modes (SC, SA, S_).
How to measure speed in opposite lane moving mode.
How to measure speed in same lane moving mode.
Explains the shadowing effect and how to eliminate it.
How to set the low-end patrol speed to 5 or 20 mph.
How to adjust the radar's sensitivity levels.
Adjusts the volume of the target Doppler audio.
Adjusts the volume of voice annunciations.
Adjusts the volume of different beep tones.
Controls display brightness and keyboard backlight.
Blanks the patrol speed window and reacquires patrol speed.
Shows the installed software version of the unit.
Displays the radar's transmitter frequency.
Explains the time-distance method for measuring target speed.
Details keys used for stopwatch mode operation.
Explains potential error messages like FAIL or Err.
Provides instructions for operating in stopwatch mode.
Instructions on how to revert to Radar mode from Stopwatch mode.
Illustrates faster speed tracking in moving mode with examples.
Illustrates faster speed tracking in stationary mode with examples.
How terrain features can affect radar signals and range.
How rain affects radar signals and readings.
Sources of electrical noise that can affect radar performance.
Explains erratic operation due to noisy vehicle electrical systems.
How fan noise can cause erroneous readings and how to mitigate it.
How nearby transmitters can interfere with radar operation.
Explains low voltage conditions and their effects.
Steps to take if the radar unit does not power on.
Recommended performance checks for ongoing accuracy.
Describes the automatic self-test performed on power-up.
Performs a diagnostic check on the display/counting unit and antenna.
Procedure for tuning fork calibration in stationary mode.
Procedure for tuning fork calibration in opposite lane moving mode.
Procedure for tuning fork calibration in same lane moving mode.
Optional test for verifying speed measurement and direction sensing.
How VSS helps measure patrol speed and avoid anomalies.
Explains the VSS signal and its use by the radar.
Lists advantages of using VSS for patrol speed.
Instructions for installing the VSS cables.
Explains the radar's auto-calibration sequence with VSS.
Steps for initial calibration when installing the radar in a new vehicle.
How VSS enables automatic mode switching.
Selecting stationary direction (SC, SA, S_) when stopped.
Addresses issues with VSS signals at low speeds.
Outlines FCC requirements for transmitting equipment and operating licenses.
Discusses legal precedents regarding Doppler speed radar evidence.
Describes the microwave radiation emitted by traffic radar devices.
Discusses experimental evidence on the potential dangers of radar radiation.
Examines cancer rates among officers using traffic radar.
Details FDA's ongoing evaluation and data collection efforts.
Simple steps to reduce exposure to microwave radiation.
Steps to resolve issues with the PWR key not functioning.
How to adjust speaker volume and resolve low volume issues.
Tips for improving radar range, e.g., setting sensitivity.
Solutions for patrol speed shadowing, including PS BLANK and speed settings.
Resolving issues with locking patrol speeds below 20 mph.
Tips for maintaining accurate patrol speed readings.
Addresses radar picking up fan noise and how to fix it.
Steps to take when the LO V icon is displayed.
What to do if the radar displays a "Hot" indication.
Covers Counting/Display Unit Dash Mount and Combination Dash Mount.
Covers Adhesive Glass Mount, Headliner Mount, Antenna Dash Mount, and Swivel Dash Mount.
Covers Dash Mount with suction cups and a standard Antenna Dash Mount.
Covers Display Hood Kit and Antenna Mirror Clamp Mount.
Covers Side Window Mount and Handlebar/Crash Bar Mounts.
Covers Universal Mounting Bracket and Sealed Remote.
Details interfacing with other systems and available baud rates.
Selecting display format for video systems, computers, printers.
Setting the minimum speed displayed in stationary mode.
Describes various options for target and patrol speed locking.
Explains the harmonic suppression indicator and its function.
Details the Fast Speed Tracking feature and its modes.
Selecting speed readings in miles or kilometers per hour.
Selecting single or dual antenna operation.
Describes a special sensitivity setting for Michigan customers.
Option to disable moving mode and use radar only in stationary mode.
Outlines the warranty period, coverage, and exclusions.
Lists conditions not covered by the warranty, like wear-and-tear or abuse.
Information on locating authorized service centers.
General| Operating Temperature | -22°F to +140°F (-30°C to +60°C) |
|---|---|
| Display | LCD |
| Target Acquisition | Automatic |
| Operating Modes | Stationary, Moving |
| Power Source | Rechargeable battery |
| Frequency Range | 24.050 - 24.250 GHz |
| Weight | 2.2 lbs (1 kg) with batteries |
