Stamina Seated Inversion Therapy System - Assembly: Front and Rear Frame; Step 1: Connecting Frame Sections

22 pages

To Next Page

To Previous Page

Place all parts from the box in a cleared area and position them on the oor in front of you. Remove

all packing materials from your area and place them back into the box. Do not dispose of the

packing materials until assembly is completed. Read each step carefully before beginning. If you

are missing a part please call our toll-free number for assistance 1-800-375-7520 or e-mail us at

customerservice@staminaproducts.com.

ASSEMBLY INSTRUCTIONS

STEP 1

Insert the REAR FRAME(2) into the brackets on the FRONT FRAME(1) and secure with BUTTON

HEAD BOLTS(M8x1.25x15mm)(46) and WASHERS(M8)(60).