Need help?Do you have a question about the Stancor SE-50 and is the answer not in the manual?
General| Model | SE-50 |
|---|---|
| Category | Water Pump |
| Voltage | 115/230V |
| Frequency | 60 Hz |
| Speed | 3450 RPM |
| Max Flow Rate | 50 GPM |
| Housing Material | Cast Iron |
| Seal Type | Mechanical Seal |
| Mounting | Base Mounted |
| Weight | 35 lbs |
| Max Head | 50 Feet |
| Outlet Size | 1.25 inches |
Details risks of electric shock and necessary precautions for safe connection and operation.
Prohibits pumping flammable or explosive fluids due to severe risks of injury or damage.
Covers pump placement, piping, check valves, and preventing dry operation.
Instructions for connecting the pump's wiring according to phase and ensuring secure connections.
Guidelines for handling the pump cable, including proper installation and essential grounding.
Pre-operation checks including insulation resistance measurement and water level verification.
Addresses issues where the pump fails to start or stops immediately after starting.
To Next Page
