Need help?Do you have a question about the Stancor SV-100 and is the answer not in the manual?
General| Model | SV-100 |
|---|---|
| Category | Water Pump |
| Voltage | 115/230V |
| Horsepower | 1 HP |
| Speed | 3450 RPM |
| Duty | Continuous |
| Phase | 1 |
| Enclosure | ODP |
| Shaft Size | 5/8" |
Details critical warnings and precautions regarding electric shock risks associated with pump operation and installation.
Provides essential cautions for pump operation, including avoiding dry running and proper installation angles for check valves.
Instructions for wiring single-phase and three-phase pumps according to diagrams and ensuring secure connections.
Guidance on proper grounding of the pump using the green wire, emphasizing it should not connect directly to the power supply.
Addresses issues where the pump does not start or stops immediately, listing common causes like power failure or faulty connections.
Covers pumps that operate briefly then stop, often due to motor protector activation from dry operation or high temperatures.
Diagnoses problems like reverse rotation, voltage drops, or clogging that lead to inadequate pumping volume.
Identifies causes of over current, such as unbalanced voltage, motor phase malfunction, or reverse rotation.
Step-by-step guide for disassembling the pump, including removing casing bolts, impeller, and mechanical seal.
To Next Page
