What to do if the Standard Horizon Radio fuse blows?
If the Standard Horizon Radio fuse blows, it could be due to reversed power wires. Check the power cable for DC voltage, or replace the fuse (7 A, 250 V). Ensure the red wire is connected to the positive (+) battery post and the black wire to the negative (-) battery post. If it continues to blow, contact your Dealer.
Why does my Standard Horizon Radio beep when connecting an intercom speaker?
The Standard Horizon Radio beeping when connecting an intercom speaker indicates an incorrect intercom speaker connection. Refer to the connection diagram for proper connections.
Instructions for installing the VLH-3000A using the MMB-84 flush mount bracket.
Details on connecting power and speakers to the VLH-3000A unit.
Steps to turn the VLH-3000A unit on and off using the LISTEN/PWR knob.
Guide to using the Hail and Listen-Back modes for communication.
Instructions for using the intercom feature with optional speakers.
Procedures for transmitting automatic signals for vessel awareness.
List of common replacement parts and their part numbers.
Guidance on contacting service centers for repairs and warranty.
A chart detailing common issues, probable causes, and remedies.
General| Brand | Standard Horizon |
|---|---|
| Model | VLH-3000A |
| Category | Radio |
| Language | English |
To Next Page
