To Next PageTo Next Page
Need help?Do you have a question about the Stanley BC25BS and is the answer not in the manual?
General| Type | Battery Charger |
|---|---|
| Input Voltage | 120V AC |
| Max Output Current | 25A |
| Engine Start | Yes |
| Battery Reconditioning | Yes |
| Alternator Check | Yes |
| Microprocessor Controlled | Yes |
| Output Voltage | 6V/12V |
| Battery Type | AGM, Gel |
Identifies and describes the various physical parts and indicators of the battery charger.
Explains the elements and indicators shown on the battery charger's LCD screen for operation status.
Provides essential safety warnings for operating the battery charger and handling batteries to prevent injury.
Details safety instructions for power cords, including extension cord usage and proper connection to prevent hazards.
Guides on selecting a safe location for the charger and precautions for connecting clamps to avoid sparks and damage.
Outlines immediate first aid steps for exposure to battery acid or LCD liquid and general safety advice.
Step-by-step guide for connecting the charger and initiating the battery charging process with LCD indicators.
Instructions on how to check the battery's voltage in standby and charging modes using the charger's interface.
Details how to test the vehicle's alternator performance using the charger's diagnostic function.
Explains the process of reconditioning a battery to restore its optimal performance using electrical pulses.
Guides on using the charger's engine starting capability for vehicles needing a boost.
