Need help?Do you have a question about the Stanley CROSS 90 and is the answer not in the manual?
General| Laser Class | Class 2 |
|---|---|
| Laser Diode | 635 nm |
| Self-Leveling Range | ±4° |
| Power Source | 2 x AA batteries |
| IP Rating | IP50 |
| Battery Life | Up to 20 hours |
| Operating Temperature | -10°C to +50°C |
Carefully read instructions, heed safety warnings, and understand product labeling for safe operation.
Identifies key parts of the laser tool, including mount, window, switch, and LED indicator.
Details the QuickLink bracket assembly and its components for mounting the laser tool.
Explains keypad functions, laser beam modes (Cross Line, All Beams), and self-leveling/manual operation.
Describes the meaning of the LED indicator for power, pendulum lock, and leveling status.
Details various mounting applications for the QuickLink bracket.
Guides for using laser beams for plumb transfer, level transfer, and squaring applications.
Instructions for installing/removing batteries, including crucial safety warnings for proper insertion.
Guidance on tool placement, accessory mounting, and safety precautions during attachment.
Key notes on checking accuracy, manual mode operation, and powering off when not in use.
Details on factory calibration, recommended checks, and the importance of pendulum lock for accuracy.
Procedure to measure and verify the accuracy of the horizontal and vertical laser beams for leveling.
Method to check the accuracy of the horizontal beam projection against a reference point.
Procedure to measure and verify the accuracy of the vertical beam projection against a reference point.
Steps to test the accuracy of the side vertical laser beam projection, requiring specific floor space.
Provides detailed technical data including leveling accuracy, working distance, laser class, and operating conditions.
To Next Page
