Need help?Do you have a question about the Stanley FATMAX SFMCN616 and is the answer not in the manual?
General| Battery Voltage | 20V |
|---|---|
| Tool-Free Depth Adjustment | Yes |
| Tool-Free Jam Release | Yes |
| Sequential Trigger | Yes |
| Magazine Capacity | 100 |
Keep work area clean and well lit. Do not operate in explosive atmospheres. Keep children away.
Match plugs to outlets. Never modify plugs. Avoid body contact with earthed surfaces. Do not expose to rain.
Stay alert, use common sense. Wear PPE. Prevent unintentional starting. Remove keys/wrenches. Dress properly.
Do not force tool. Repair damaged tools. Disconnect power before adjustments. Store out of reach of children.
Recharge with specified charger. Use only designated battery packs. Keep away from metal objects.
Never allow unqualified persons to use the machine. Do not operate near people or pets. Follow local regulations.
Never attempt to open. Do not expose to water. Do not store above 40°C. Charge between 10-40°C.
Use specified charger. Never charge non-rechargeable batteries. Have defective cords replaced.
Provides information on LED indicators for charging status, fully charged, and hot/cold pack delay.
Ensure proper PPE is worn. Remove battery pack and engage trigger lock-off before maintenance.
Depress contact trip, then pull trigger. Release both after each nail. Always remove battery when not in use.
Adjust depth using wheel. Left for deeper, right for shallower. Always remove battery before adjusting.
To Next Page